Level Check Code: Difference between revisions
From Rabbi Blog
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
==Desc== | |||
Performs a 9 point check on bed leveling. | |||
Save as .gcode for printer and run. | Save as .gcode for printer and run. | ||
I have POS 1-5 saved as separate files on the SD card under POS\ for quick reference, as well as this master file for a full check. | ==Notes== | ||
* I have POS 1-5 saved as separate files on the SD card under POS\ for quick reference, as well as this master file for a full check. | |||
* Used on an Ender 3 | |||
** Gap check with index card | |||
* I perform the test on a cold bed, if you are looking for a hot test, this is not for you | |||
==Path== | |||
[[File:9PointLevelTest.png]] | [[File:9PointLevelTest.png]] | ||
<hr> | <hr> | ||
==Code== | |||
<pre> | <pre> | ||
; 9 Point Level Check - RB | ; 9 Point Level Check - RB | ||
Revision as of 10:59, 22 September 2019
Desc
Performs a 9 point check on bed leveling.
Save as .gcode for printer and run.
Notes
- I have POS 1-5 saved as separate files on the SD card under POS\ for quick reference, as well as this master file for a full check.
- Used on an Ender 3
- Gap check with index card
- I perform the test on a cold bed, if you are looking for a hot test, this is not for you
Path
Code
; 9 Point Level Check - RB G90 ; POSITION 1 G1 Z4 G1 X32 Y36 G1 Z0 M0 ; POSITION 2 G1 Z4 G1 X32 Y206 G1 Z0 M0 ; POSITION 3 G1 Z4 G1 X202 Y206 G1 Z0 M0 ; POSITION 4 G1 Z4 G1 X202 Y36 G1 Z0 M0 ; POSITION 5 G1 Z4 G1 X117 Y121 G1 Z0 M0 ; POSITION 6 G1 Z4 G1 X32 Y121 G1 Z0 M0 ; POSITION 7 G1 Z4 G1 X117 Y206 G1 Z0 M0 ; POSITION 8 G1 Z4 G1 X202 Y121 G1 Z0 M0 ; POSITION 9 G1 Z4 G1 X117 Y36 G1 Z0 M0 ; Home G1 Z4 G1 X0 Y0 G1 Z0 ; Disable Motors M84