Distant Screws II Challenge Coin: Difference between revisions

Revision as of 13:30, 3 March 2021

Heads: Logo + Distant Screws II Jan\Apr 3307 53.2K (light years)

Tails: Evelyn's Star + The expedition route (Ross310 -> Evelyn's Light -> Colonia -> Qama)

About

Placeholder

ReadMe

A how-to for printing the 3D LS DS II Challenge Coin for anyone that was on the 2021 Distant Screws II Expedition.

The front-side features the classic LS Logo, the expedition name, dates and the waypoint distances traveled.

The backside features the four points of the journey (ROSS310-EVELYNS LIGHT-COLONIA-QAMA) and a star to honor Evelyn Faye Roy.

Printing Suggestions

    Scale to 60mm x 60mm x 8mm (or 10mm)
    Super Quality
    No Infill

1) With trees: On an edge - will require sanding and clean up. 2) In halves:

    Duplicate the STL on the bed
    Sink both below the bed to 1/2 the Z width (-4mm or -5mm)
    Flip one of the faces
    Print
    Glue together
    Sand edge as needed with 220g and 500+

Created by RabbiBob 3/1/2021 w/ Blender 2.9.x

Download

Download: Zip file 4.5MB

Directions

@@ Line 1: / Line 1: @@
+[[File:DS2-Heads.jpg|thumb|Heads: Logo + Distant Screws II  Jan\Apr 3307 53.2K (light years) ]][[File:DS2-Tails.jpg|thumb| Tails: Evelyn's Star + The expedition route (Ross310 -> Evelyn's Light -> Colonia -> Qama)]]
 ==About==
 Placeholder
-[[File:DS2-Heads.jpg|thumb]][[File:DS2-Tails.jpg|thumb]]
 ==ReadMe==