Actions

Distant Screws II Challenge Coin

From Rabbi Blog

Revision as of 17:31, 3 March 2021 by Rabbi Bob (talk | contribs) (→‎ReadMe)
Heads: Logo + Distant Screws II Jan\Apr 3307 53.2K (light years)
Tails: Evelyn's Star + The expedition route (Ross310 -> Evelyn's Light -> Colonia -> Qama)

About

Placeholder

ReadMe

A how-to for printing the 3D LS DS II Challenge Coin for anyone that was on the 2021 Distant Screws II Expedition.

The front-side features the classic LS Logo, the expedition name, dates and the waypoint distances traveled.

The backside features the four points of the journey (ROSS310-EVELYNS LIGHT-COLONIA-QAMA) and a star to honor Evelyn Faye Roy.


Printing Suggestions 

    Scale to 60mm x 60mm x 8mm (or 10mm)
    Super Quality

1) With trees: On an edge - will require sanding and clean up. 2) In halves: 

    Duplicate the STL on the bed
    Sink both below the bed to 1/2 the Z width (-4mm or -5mm)
    Flip one of the faces
    Print
    Glue together
    Sand edge as needed with 220g and 500+


Created by RabbiBob 3/1/2021 w/ Blender 2.9.x

Download

Directions

Load video
YouTube
Retrieved from "https://www.rabbibob.com/index.php?title=Distant_Screws_II_Challenge_Coin&oldid=1584"